install curtain rods in nyc
  • June 24, 2023
  • Sid
  • 0

How to Install Curtain Rods in NYC?

A carefully placed curtain rod gives a room a subtle layer of decoration. Aside from finishing a room’s aesthetic, a curtain rod also has another secret ability: its capacity to cover up design flaws.

If you are looking for easy-to-install curtain rods, follow the simple instructions we’ve shared below. You will find an extensive range of curtain rods in NYC, from plain iron rods to fancy globe bracketed ones. Thanks to its wide variety, the global curtain rod market is predicted to become multimillion-dollar by 2030.

Step-By-Step Guide to Install Curtain Rods

Installing a curtain rod is pretty easy; all you need is the right set of tools and precision. Hanging drapes is pretty helpful because they help stop the sun from shining too brightly into a space. Also, hanging them a few inches above the window gives the illusion of higher ceilings.

Here is how to install rods for curtains in a few minutes.

Gather Your Tools

You’ll need a tape measure, a level, a stud finder, a screwdriver, a drill bit, screws, a power drill, wall anchors, a curtain rod, curtain rod brackets, and a pencil to install a curtain rod.

Take Window Measurements

Measure the window’s width. Increase the window frame’s width by two to five inches if you want to hang drapes that cover your window. The ideal way to maximize natural light is to hang your curtains to the edges of the window, so increase your measurement by eight to fifteen inches.

Having a hard time finding a professional curtain installation in NYC for your home? Worry not!

Mark the Wall

Measure and mark the area’s height and width where you want to install your outer brackets. Use your level to check the straightness of your curtain rod while holding it up to these markings. Make the necessary adjustments and pencil-mark the screw holes.

A middle bracket may be necessary to offer extra support for particularly lengthy curtain rods. If so, locate the curtain rod’s middle using your measuring tape, then mark a new screw hole with a pencil.

Drill Guide Holes

Drill guide holes for the fixing components into the wall after clearly marking the locations of the bracket screw holes. Use the proper drywall anchors for dependable support while drilling into drywall.

FastenCurtain Rod Brackets

Then, using a screwdriver or a drill, you may secure the curtain rod’s brackets to the wall if needed. While cordless drills might speed up and simplify this task, it’s recommended to stick with a basic screwdriver if you don’t want to overtighten the hardware. Then, double-check to ensure you have firmly fastened them to the wall by repeating this procedure for each mounting bracket.

Hang a Curtain Rod

You can now attach the brackets after setting the anchors. Insert the screws into the top and bottom anchors using a power drill while the bracket is held in place. Put screws on both ends of the curtain rod to attach the end caps. Then, hang your curtains from the rod.

Hang Curtains

The next step is to hang the curtains for the finished look. While some brackets are designed such that the rod can easily slide into the bracket’s groove, others feature screws that hold the rod in place. If the curtain rod brackets on your window treatments have screws, fasten them to keep the curtain rod from moving.

The Bottom Line

Installing curtains rods in NYC isn’t challenging, even if you do it for the first time. Follow the steps mentioned above for easy installation. Make sure you have the necessary tools in hand for easy installation.

Transform your NYC home with beautiful curtains